kitControl-NumericBitXor
In value against the bit equivalent of its StatusNumeric mask slot value. It may be useful in cases where boolean information
is mapped into integer values.
NumericBitXor is available in the Util folder of the kitControl palette, along with the closely-related NumericBitAnd and NumericBitOr.
As an example, some manufacturers multiplex binary data into a single numerical point by converting the bits from hexadecimal to decimal format. To obtain the status of the individual binary data, the number must be converted back from decimal to hex format. Each digit of the hex number represents a particular binary state (0 = false, 1 = true). The NumericBitXor object converts a StatusNumeric input to hex value and compares it against the mask value. Each digit is analyzed using exclusive OR (XOR) logic, setting the corresponding digit value to either a 1 or 0.
Figure 121. NumericBitXor example
In this example:
- Input decimal 65553 converts to a hex value of 10011.
- Mask decimal 65536 converts to a hex value of 10000.
- The resulting hex value is 00011.
Figure 122. NumericBitOr properties
| Property | Value | Description |
|---|---|---|
| Facets | Config Facets window (defaults to null units, a single decimal place, minimum=negative infinity, maximum=positive infinity, and radix=16) |
Selects units and configures how the value displays:
This definition applies to the |
| Out | read-only number (defaults to zero (0)) | Displays the result of the comparison. |
| In | number (defaults to zero (0)) and null definition | Defines the bit to compare with the Mask.
|
| Mask | number (defaults to zero (0)) and null definition | Defines what to compare with the In property.
|