Warmup Config (web-WebWarmupConfig)
These properties configure what happens when a controller restarts. You can use them to speed up the loading time of the first page for Hx profiles. Once you have run an HxPx profile in a station, it records that you are an HxPx user, which enables Warmup Config by default the next time you restart the controller.
If you are not using Warmup Config or HxPx, turn it off by setting Enabled to No.
To access this component, double-click .
Refer to separate topic.
In addition to the common properties (Status and Fault Cause), these properties are unique to this component.
| Property | Value | Description |
|---|---|---|
| Enabled | Yes, No and When User Activity Found (default) | Controls when a user starts to use the HxPx feature. |
| Running | true or false (default) | Configures whether or not the WebWarmup is currently running.
This is usually only true just after a station starts
unless it ran manually with the Warmup action. When a station runs by default it is true unless the station runs manually with the Warmup action. |
| Interrupted | true or false (default) | Controls a station interrupt. This is usually false and only true in two cases:
|
| User Activity Found | true or false (default) | Controls if a warmup runs after a station reboot. For the Warmup process, this property is true when a user uses a framework feature. For example for the HxPxWarmup this property is true when a user loads an HxPx file from a browser. Once it is true, it stays true even after a restart. This allows the Warmup to run after a reboot. For HxPxAppWarmup, this property is true for any WebActivity. |
| Recent User Activity Found | true or false (default) | Functions the same as User Activity Found except after a restart when it defaults to false. It is a flagged transient. |
| Last Warmup Time | read-only | Displays the time of the last warmup. |