Asure ID Client Device view
This view configures Asure ID as a client device of the Photo ID station (the server).
Figure 452. Asure ID Client Device tab
You access this view from the Supervisor’s main menu by clicking Photo ID followed by double-clicking the Asure ID Client Device row in the Photo ID Network table.
Links
In addition to the Save link, these links support the Asure ID client device.
- Ping sends a message to the device to confirm that it is on line.
- Photo ID Network returns to the Photo ID Network view.
Properties
In addition to the standard properties (Status, Enabled, Fault Cause, Health, and Alarm Source Info), these properties support an Asure ID client device.
| Property | Value | Description |
|---|---|---|
| Key | read-only | Displays a unique identifier for a particular EntsecAsureID (non-legacy) device and is provided automatically during discovery. After manually adding the EntsecAsureID device, you match with the discovered device in order to populate this property. |
| Host Name | text | Defines the platform host name or the IP address of the computer that is running EntsecAsureID. |
| EntsecAsureID Port | text | Identifies the port used for the EntsecAsureId connector. |
| Timeout | hours minutes seconds | Defines how long to wait for network communication to begin before returning a fault. |