CMD
Figure 147. CMD properties
To access these properties, expand and double-click ELog.
The Bacnet Command object writes multiple values to multiple objects in multiple devices to complete a specific purpose.
In addition to the common properties (Status and Fault Cause), this component has these properties.
| Property | Value | Description |
|---|---|---|
| Poll Frequency | drop-down list (defaults to Normal)
|
Selects among three rates (Fast, Normal and Slow) to determine how often to query the component for its value. The network’s
Poll Service or Poll Scheduler defines these rates in hours, minutes and seconds. For example:
This property applies to all proxy points. |
| Object Id | drop-down list and number (from 0 to 4194302) | Identifies each device and component by the type of entity (Object Id) combined with a unique Instance Number.
For devices (controllers, instruments, meters, etc.), |
| Object Name | text in the format name.name.name.name (default includes the entire component path in the station using period (“/) delimiters between parent.child levels) | Identifies a BACnet object. This name should be unique within this specific device.
For components, this name includes the entire component path under the station’s Config using period (.) delimiters between parent.child levels. This enforces (externally) the BACnet requirement for unique names for all objects in a device. For a proxy point, this is the default name in the station. You can shorten or edit |
| Object Type | drop-down list of BACnet objects | Reports the type of object. |
| Present Value | number | While Out Of Service is set to true, this property reflects the last written Present Value.
|
| Facets | Config window or read-only property | Configures the units used for the current component or point value. These could be parent or child point facets. |
| In Process | true or false (default)
|
|
| All Writes Successful | true (default) or false |
|
| Action | additional properties |