Importing a signed certificate
This procedure creates a provisioning job to import a signed certificate for each remote device in the job. The files to import
should be located in the
^certImport folder on the
Prerequisites:
- The BatchJobService is available under Services. The ProvisioningNwExt component is available under the NiagaraNetwork. The Niagara Network Job Builder (one-time) or Niagara Network Prototype View (reoccurring job) is open.
- A signed certificate exists in the ^certImport folder on the
- In the Niagara Network Job Builder window in the top pane, Provisioning steps to run for each station, click add (
).The New Job Step window opens. - Select the Import Signed Certificate step and click OK.The system opens the Import Signed Certificate window.
- Enter the
File Naming Identifierand theCertificate Aliasfor the certificate on the remote device. If the certificate contains a private key, enter it into theSupervisor Passwordproperty. - In the bottom pane, Stations to include in the job, click add ().The Add Device window opens.
- Click to select the stations and click OK.
- To initiate the provisioning job, review your choices and click the Run Now button at the bottom of the Niagara Network Job Builder view.The view changes to the Niagara Network Job View, where steps and results appear as they are executed.