Tokens
This component is a BNumericPoint that can be tracked, alarmed, and charted like any other NumericPoint. Using it improves
the ability to diagnose certain configuration problems. While the problems may require a site visit to resolve, the metrics
may provide a valuable diagnostic starting point.
Figure 98. Tokens properties
| Type | Value | Description |
|---|---|---|
| Facets | trueText (default) or falseText | Facets contain additional data applied to input and output values.
For example, you might want to set the facet trueText to display “ON” and the facet falseText to display “OFF.” "Units of measurement" is also a type of facet. You can view Facets on the Slot sheet and edit them from a component Property sheet by clicking the >> icon to display the Config Facets window. |
| Proxy ext | null indicates that the point is an empty placeholder. The station itself originates the point’s default Out value.driver type identifies the driver and point type. For example, a proxy ext of BacnetBoolean identifies a BooleanWritable. The point under the Points container of a Bacnet Device has a proxy extension of BacnetBooleanProxyExt. | A frozen property found on each point that indicates from where the point’s data originate, including details specific to the parentage of the point’s network and communications (driver). |
| Out | value facets {ok} | The current out value, including any point facets. Out display of a proxy point defaults to only the single (configured) property value, along with the status for the proxy point. You can edit point facets to poll for additional properties, such as the native "statusFlags" and/or "priorityArray" level. |
| Enabled | true or false |
Activates and deactivates use of the function. |
| Update Interval | hours minutes seconds | Indicates how frequently new information is reported. |
| Mstp Os Name | /dev/name | Where name is mstp followed by a single digit to identify the MS/TP port. This is the order in which the ports are started (the order in which they appear under the BBacnetNetworkLayer). For example, mstp1, mstp2. |
| Received Tokens | number | |
| Generated Tokens | number | |
| Parse All Metrics | true (default) or false | |
| serialport | /dev/sernumber | Where number is a single digit that identifies the serial port. |
| baudrate | 0.00 | |
| macaddress | 0.00 | |
| maxinfoframes | 0.00 | |
| maxmaster | 0.00 | |
| master_state | 0.00 | |
| receive_state | 0.00 | |
| nextstation | 00.00 | |
| pollstation | 0.00 | |
| solemaster | true or false (default)
|
|
| declaresolemaster | 0.00 | |
| framecount | 0.00 | |
| tokencount | 0.00 | |
| silencetimer | 0.00 | |
| n40bitdelay | 0.00 | |
| chartimens | 0.00 | |
| validframes | 0.00 | |
| invalidframes | 0.00 | |
| apptx | 0.00 | |
| apprx | 0.00 | |
| skippedframes | 0.00 | |
| unwantedframes | 0.00 | |
| testrequest_rx | 0.00 | |
| testrequest_tx | 0.00 | |
| testresponse_rx | 0.00 | |
| testresponse_tx | 0.00 | |
| extframes_rx | 0.00 | |
| extframes_tx | 0.00 | |
| ip_6lobac_rx | 0.00 | |
| ip_6lobac_tx | 0.00 | |
| n6lobac_rx_brdcst | 0.00 | |
| n6lobac_tx_brdcst | 0.00 | |
| badheadercrc | 0.00 | |
| baddatacrc16 | 0.00 | |
| baddatacrc32 | 0.00 | |
| txq_fullcount | 0.00 | |
| serialtxfails | 0.00 |