About Milestone driver configuration
Milestone drivers and software products
The nmilestone driver supports the XProtect Professional product:
- XProtect Professional
- XProtect Enterprise (deprecated, but uses the same nmilestone.jar API)
The xprotect driver supports the XProtect Professional+ and XProtect Corporate products.
- XProtect Professional+
- XProtect Corporate
Interfaces
Two interfaces are available to add and configure these drivers in a station:
The Niagara Enterprise Security Installation and Maintenance Guide references both interfaces. The Niagara Video Framework Guide (this guide) references the
Licensing
The milestone and xprotect drivers require a Milestone software license.
Driver naming conventions
The two drivers are referred to in different ways depending on where you are in
Milestone naming conventions
| Driver names in the
|
Milestone product(s) supported | License name | .jar file names | Add Driver name in the Web UI |
|---|---|---|---|---|
| nmilestone | XProtect Professional | milestoneVideo | nmilestone-rt.jar and nmilestone-wb.jar | Milestone Network (nmilestone) |
| xprotect | XProtect Professional+ and XProtect Corporate | milestoneCorporate | xprotect-wb.jar | Milestone X Protect Network (xprotect) |
Palettes
Two palettes provide Milestone and XProtect components. These palettes require the
Figure 58. Palettes and components
The xprotect driver provides these components:
- MilestoneXProtectNetwork sets up the network component.
- XProtectManagementServer connects to the Milestone management server, which may reside in a separate computer.
- Cameras is a folder for collecting one or more XProtect-compatible camera devices.
- Recording Servers is a folder for collecting recording servers.
- XProtectCamera provides camera configuration properties.
- Events is a folder for collecting events, such as motion detected.
The nmilestone driver provides these components.
- NMilestoneNetwork sets up the network component.
- NMilestoneDvr sets up a Milestone DVR.
- Displays is a folder for collecting one or more monitors to display video.
- Cameras is a folder for collecting one or more camera devices.
Port numbers
If Milestone and the station are installed on the same PC, the Milestone management server requires ports 80 and 443 for its internal processes. Before connecting, you must change the ports used by the WebService to 81 and 444 or relocate the management server to another computer that shares the network.
If you change the WebService ports and have connection problems, you may need to open them up in your firewall.