Adding a CloudSentienceDevice

Use the following procedure to add a new CloudSentienceDevice to the NiagaraCloudNetwork.

Prerequisites: You added the NiagaraCloudNetwork to the station’s Drivers folder.

Double-click the NiagaraCloudNetwork.
The Cloud Device Manager opens.
Click New and select Cloud Sentience Device from the Type to Add drop down list and click OK.
In the second New window, name the device as desired.
Accept the default ORD or expand the folder icon () to the right of the Connector property and use the Component Chooser to select the cloud connector and click OK.
Make sure that the Connector property (an ORD) points to a properly configured and connected cloud connector. When you add the device using the New button the driver automatically selects the connector if there is only one, and, typically there is no need to have more than one connector installed in a station.

The driver adds the CloudSentienceDevice to the network device where it appears as a row in the Cloud Device Manager table.